Description
Epoxy Resin 3:1 is perfect for resin art, jewelry making, and DIY craft projects. It provides a smooth, durable finish with crystal-clear results. Ideal for creating beautiful, long-lasting pieces with a professional touch. Get your 3:1 epoxy resin today for all your artistic creations at Jogi art. special use for mold article flower preservation. Ex 3:1 – PROPERTY Specification Value Mixing Ratio R:H – 3:1 Pot Life At 25° C 90 – 120 Min Touch Dry 8 – 12 hours Fully Cured 24 – 36 Hours Measurement By Weighing Scale Viscosity At 25° C 500 – 800 Hardness 75 Shore D Properties Description Best For Silicon Mold Casting, Deep Casting & Top Coat Transparency Crystal Clear with Glass like transparency. Bubble-Free Bubble get automatically busted after mixing Wetting property Uniformly spread to the surface, resulting in a smooth and even layer without any gaps, shrinkage or bubbles Consistency Thin consistency for easy mixing that also improve Mold’s life. Features Non-yellowing, Moisture Free, Hard Cure & Conforms to ASTM Rules For Deep Pour Description Layer 2nd layer pouring after 8-10 hrs. Casting Thickness Capable of casting up to 8-10 mm in a single layer. Deep Pour Capable of 2-3 inch (60 MM) deep pour in 6-8 layers. Precautions Guidelines Application Exercise caution in high humidity, low daylight, and low temperature conditions. – Maintain ambient temperature (20-35°C) and humidity below 65%. – Use vacuum to achieve air-free components in filled molds. Mixing Thoroughly mix manually or mechanically to eliminate haziness or streaks.- Mix small quantities to test your ratio Safety Wear personal protective equipment (PPE). – Avoid eye and skin contact; wash off with warm water if necessary. – Prevent inhalation of vapors, mist, or gas. Keep hardener bottle closed due to fuming tendency. for best result use Jogi art pigment and Jogi art mica powder. visit jogiart.com for good quality resin for art.
